There are no products in your shopping cart.
0 Items | $0.00 |
There are no products in your shopping cart.
0 Items | $0.00 |
The DMR-800D, operating on SkyWave’s global IsatM2M network, offers customers looking to track, monitor and control remote fixed and mobile assets a low-cost terminal and network solution that is easy to use, install and maintain.
With reliable two-way communication, 5 Ocean Region coverage, low latency and low setup costs, the DMR-800D is ideal for applications ranging from fleet management and security to Supervisory Control and Data Acquisition (SCADA) telemetry.
Programming and customizing the DMR-800D terminal is easy. SkyWave’s feature-rich development tools are industry-leading and allow customers to easily program applications and get to market faster. The processing power in the DMR-800D is ideal for today’s sophisticated and high-value applications.
DMR-800D offers low power modes of operation which are specifically designed to allow customers to deploy the terminal in remote unmanned locations where long battery life is critical.
Track, monitor and control all assets with two-way satellite communication that enables communication to and from the asset.
Receive messages from remote assets quickly with low message latency.
Be informed of specific events and maintain low messaging costs with exception-based reporting.
Maximize battery life with low-power consumption.
Monitor and control sensors with digital and analogue input/output ports.
Monitor a variety of remote assets cost- effectively with flexible billing plans with low monthly costs and competitive per message price.
Quickly add new features or customize the configuration of the satellite device without dispatching a technician with over-the-air programming.
Counteract malicious security threats with GPS jamming detection.
Get to market faster with customizable and easy programming interface.
PHYSICAL |
|
Size |
160mm (diameter) x 47 mm (height) |
Mass |
~500 g |
ENVIRONMENTAL |
|
Operating Temperature |
-40°C to +85°C |
Storage Temperature |
-40°C to +85°C |
Humidity |
95%RelativeHumidityat+30°C non-condensing |
Dust & Water Ingress |
IP67/NEMA-4X |
Vibration |
5-20 Hz; 1.92 m2/s3 random noise |
Shock (survival) |
Half sine 6ms, 300 m/s2 |
ELECTRICAL |
|
Input Voltage | 9VDCto32VDC |
Power Consumption (Typical @ 12VDC, 22°C ) | Transmit mode: 10.5 W Tracking mode (GPS on): 1.0W Hibernatemode:0.24mW |
Mating Connector | Conxall Mini-Con-X® 6282-8SG-3DC |
SATELLITE COMMUNICATIONS (D+/ISATM2M) |
|
Frequency | Rx:1525.0 to 1559.0 MHz; 32-FSK Tx:1626.5 to 1660.5 MHz; 2-FSK |
EIRP | 9dBWmax |
Elevation Angle | 0to+90degrees |
GPS |
|
Channels | 16 channels; 1575.42MHz |
Acquisition | Cold-start:34s SuperSense:-148dBm |
Accuracy | 2.5mCEP; 5.0mSEP |
CERTIFICATIONS / COMPLIANCE |
|
Satellite | Inmarsat D+/IsatM2M Type Approved |
Regulatory | FCC;RoHS; CEMark(R&TTE); Anatel: IEC/EN 60945 |
MEMORY |
|
Data Log Capacity | 320kB; Up to 17,200 positions |
SECURITY |
|
Jamming | GPS jamming detection |
Programming | Script encryption capability |
EXTERNAL INTERFACES |
|
Serial | RS232: console interface Supports optional NMEA output Password-protected access |
Analog/Digital | 4 Software-configurable input/output Digital or 10-bit A/D input Digital output; max sink 250mA 4-20mA current detection (pin 8 only) |
PROGRAMMING CAPABILITIES |
|
Script Logic | 128 Actions 64 Alarms 64 Timers 32 Data transformers 4 programmable I/O lines–digital or analog 128 Geofences (circular, rectangular, polygons) Low Power modes with scheduled or I/O wakeups |
SATELLITE MESSAGING |
|
From-Terminal | Up to 192 bytes |
To-Terminal | 4 alert codes + up to 100 bytes |